Simple Maintenance Tips to Keep a Lift Boom Safe and Strong

Always check the lift boom before starting your work each day. Walk around the machine and look closely for cracks, oil leaks, rust, or broken parts. If anything looks wrong, do not use it. Check the tires for damage or wear. If the tires are flat or broken, stop using the machine. Also, make sure all safety tools are working well. Check guardrails, buttons, stop switches, and alarms. These parts help prevent accidents on the job.

Check the oil, hydraulic fluid, and coolant levels. If any fluid is low, fill it before turning on the machine. These simple checks can stop big problems and keep everyone safe.

Use the Service Plan in the Manual

Every lift boom comes with a service guide in the manual. It tells when to change the engine oil and replace the air and oil filters. The guide also shows where to put grease and which type to use. Greasing moving parts, such as joints and pins, helps prevent metal parts from rubbing. Without grease, metal parts break more quickly. Always use the grease type written in the manual. Skipping this care can cause damage and shorten the machine’s life.

Let a Professional Do a Full Check

Some problems are not easy to see from the outside. A trained technician can do a deep check of the lift boom. This should be done once every few months. Technicians look at the full machine, test all safety systems, and fix any damage. They know what to check and how to repair it the right way.

When buying during an equipment sale, ask if full service is included. Many sellers offer extra care plans with the equipment sale. This keeps the machine running well for a long time.

Clean the Lift Boom to Prevent Damage

Dust, dirt, and mud can make the lift boom break faster. Use water and mild soap to clean the outside of the machine. Clean off anything that can cause rust, like oil or wet dirt. Clean the inside of the operator cabin, too. Dust or trash inside can block the controls or make working harder. Also, wipe near the hydraulic parts to keep them clean. Dirt near these parts can enter the system and cause damage. Regular cleaning helps the lift boom stay strong and work safely.

Look after the Machine’s Battery

The battery gives power to the lift boom, so it must stay in good shape. Look at the battery often. Check for rust on the metal parts and look for loose wires. If the battery is dirty, wipe it gently with a dry cloth. Make sure the water level is full if the battery type needs it. Charge the battery the right way using the manual’s instructions. Charging it too much or too little will damage it.

Check the battery’s voltage from time to time. If the voltage is too low, the machine will not work well. If buying during an equipment sale, ask if the battery is new or recently checked.

Keep the Lift Boom Stored in a Safe Spot

When the lift boom is not in use, it must be stored safely. Put it in a dry, covered place like a shed. Rain or snow can cause rust on metal parts if the machine stays outside. Retract the boom arm to stop it from moving on its own. Some people also move the platform to the side to avoid other machines hitting it.

If the machine won’t be used for a long time, remove the battery. This will stop the battery from losing power. Proper storage saves money by avoiding repairs. Even if the machine was bought during an equipment sale, good storage still matters.

Final Words:

Small care steps make a big difference in the machine’s life. Check the lift boom daily and clean it often to stop early damage. Follow the manual for deep checks and greasing. Look after the battery and store the machine safely.

These tips help the lift boom work better and last longer. They also keep the workplace safe from accidents. Whether bought new or during an equipment sale, good care makes the lift boom a smart, long-term investment.